top of page

Load data for .260 PICRA + .264 | 107gr | Sierra Tipped MatchKing

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 107gr | Sierra Tipped MatchKing

Load Specifications

Bullet:
.264 | 107gr | Sierra Tipped MatchKing
Manufacturer SKU:
7407
Bullet Weight:
107gr | 6.9g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.180" | 30.0mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.373" | 60.3mm
Seated Depth:
0.322" | 8.2mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B5804_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 64 loads in caliber .260 PICRA with .264 | 107gr | Sierra Tipped MatchKing bullet and 32 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
70%
49734
88%
**04
100%
ADI APS 350
<<locked>>
73%
49298
87%
**01
100%
ADI APS 450
<<locked>>
74%
49951
88%
**34
100%
ADI AS 30
<<locked>>
69%
49269
87%
**34
100%
ADI AS 50N
<<locked>>
63%
49951
88%
**67
100%
Accurate 4100 👍
<<locked>>
64%
49313
87%
**06
99%
Accurate No. 11 FS
<<locked>>
71%
50763
90%
**45
96%
Accurate Solo 1000
<<locked>>
68%
50720
90%
**67
100%
Accurate Solo 1250
<<locked>>
64%
49255
87%
**70
100%
Alliant BLUE DOT
<<locked>>
67%
49705
88%
**70
100%
Baschieri & Pellagri 100
<<locked>>
64%
49748
88%
**40
100%
Hodgdon Clays
<<locked>>
73%
50865
90%
**37
101%
Hodgdon H110
<<locked>>
66%
49879
88%
**39
98%
Hodgdon LilGun
<<locked>>
66%
50473
89%
**36
100%
Hodgdon TrailBoss
<<locked>>
96%
31183
55%
**68
100%
Maxam CSB 1
<<locked>>
67%
49530
88%
**73
100%
Maxam CSB 2
<<locked>>
62%
49037
87%
**63
100%
Maxam CSB 3
<<locked>>
66%
49734
88%
**73
100%
Maxam CSB 4
<<locked>>
66%
50821
90%
**63
100%
Maxam CSB 5
<<locked>>
66%
50734
90%
**50
100%
ReloadSwiss RS 14
<<locked>>
95%
31038
55%
**94
100%
ReloadSwiss RS 30
<<locked>>
80%
50067
89%
**45
99%
SNPE Vectan A0
<<locked>>
65%
49545
88%
**06
100%
SNPE Vectan BA10
<<locked>>
70%
50705
90%
**37
100%
SNPE Vectan BA6 1/2 👍
<<locked>>
83%
49559
88%
**77
100%
SNPE Vectan BA7 1/2
<<locked>>
66%
50314
89%
**72
100%
Somchem S265
<<locked>>
76%
49458
87%
**19
97%
Vihtavuori 3N38
<<locked>>
64%
49763
88%
**50
100%
Vihtavuori N105
<<locked>>
64%
49908
88%
**24
100%
Vihtavuori N110 👍
<<locked>>
75%
49734
88%
**03
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
49835
88%
**98
100%
Winchester 296
<<locked>>
65%
50299
89%
**45
95%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
39842
70%
**73
100%
ADI APS 350
<<locked>>
61%
39001
69%
**83
100%
ADI APS 450
<<locked>>
61%
38667
68%
**83
100%
ADI AS 30
<<locked>>
61%
42250
75%
**48
100%
ADI AS 50N
<<locked>>
61%
48167
85%
**40
100%
Accurate 4100
<<locked>>
61%
44846
79%
**34
98%
Accurate No. 11 FS
<<locked>>
61%
35578
63%
**03
90%
Accurate Solo 1000
<<locked>>
61%
43700
77%
**78
100%
Accurate Solo 1250
<<locked>>
61%
45556
81%
**27
100%
Alliant BLUE DOT
<<locked>>
61%
41887
74%
**72
100%
Baschieri & Pellagri 100
<<locked>>
61%
46050
81%
**98
100%
Hodgdon Clays
<<locked>>
61%
40292
71%
**96
100%
Hodgdon H110
<<locked>>
61%
41336
73%
**85
95%
Hodgdon LilGun
<<locked>>
61%
42728
76%
**27
99%
Hodgdon TrailBoss
<<locked>>
61%
17361
31%
**2
100%
Maxam CSB 1
<<locked>>
61%
42598
75%
**88
100%
Maxam CSB 2
<<locked>>
61%
47268
84%
**34
100%
Maxam CSB 3
<<locked>>
61%
44338
78%
**07
100%
Maxam CSB 4
<<locked>>
61%
45382
80%
**04
100%
Maxam CSB 5
<<locked>>
61%
45208
80%
**78
100%
ReloadSwiss RS 14
<<locked>>
62%
17448
31%
**2
100%
ReloadSwiss RS 30
<<locked>>
61%
27789
49%
**65
90%
SNPE Vectan A0
<<locked>>
61%
44353
78%
**50
100%
SNPE Vectan BA10
<<locked>>
61%
42496
75%
**32
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
26266
46%
**99
96%
SNPE Vectan BA7 1/2
<<locked>>
61%
43888
78%
**86
100%
Somchem S265
<<locked>>
61%
31995
57%
**17
90%
Vihtavuori 3N38
<<locked>>
61%
46456
82%
**04
100%
Vihtavuori N105
<<locked>>
61%
44686
79%
**72
100%
Vihtavuori N110
<<locked>>
61%
32822
58%
**40
97%
Vihtavuori N32C Tin Star
<<locked>>
61%
29733
53%
**35
100%
Winchester 296
<<locked>>
61%
43004
76%
**44
93%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page